void setup()
{
// initialize serial to a baud rate of 9600. Ensure that the same baud rate is set in the serial monitor.
Serial.begin(9600);
}
void loop ( )
{
Serial.print("Hands on") ; //does not insert a newline at the end; next message continues on the same line
Serial.print("Learning ") ; //does not insert a newline at the end; next message continues on the same line
Serial.println("is Fun!!!") ; //inserts a newline at the end; next message is printed on a new line
}]] ></ac:plain-text-body></ac:structured-macro><p><brmacro><p>If /></p><p>If you see strange-looking characters in the serial monitor, your bit / baud rate set in the Serial Monitor most likely does not match the one used in your Arduino sketch.</p><h3>Screencast</h3><p><ac:structured-macro ac:name="widget" ac:schema-version="1" ac:macro-id="b0b4fbf2-958e-4916-9c77-56cba00e3143"><ac:parameter ac:name="url"><ri:url ri:value="http://youtube.com/watch?v=q1DmNqlrY9U" /></ac:parameter></ac:structured-macro></p> |