Switch on the MASTER SWITCH on the table.

Touch on the Touch Panel to start.

By Default both TV will display PC.

For Laptop, connect the HDMI cable labelled "To TV 1 & 2".

1) To have different source concurrently, connect the HDMI cable labelled "To TV 2".

Then select Visualizer.

Return to default by selecting Cynap system.

2) To mute and unmute ceiling mic. To adjust PC and mic volume.

(Pendant mic volume can also be adjusted by the up/down arrow button on it)

3) To enable/disable auto tracking for lecturer and student camera.

4) To turn On/Off Lecturer and group TV.

5) To turn Off the system after use

To Use As Whiteboard

1) Tap on the TV screen, tap the + button then select Whiteboard.

To Assign Lecturer display to group display/ group display to lecturer display.

2) Tap on the TV screen, tap the button and the following screen will appear. Tap and drag the Lecturer display (yellow circle) to the group display you want (White circle).

You can also assign group display to lecturer display by dragging the White circle to the Yellow circle.

3) After assign, tap on the arrow.

Zoom/Panopto Setting

Zoom Video Setting

Select “Echo Cancelling Speakerphone” for both Microphone and Speaker.
Select “INOGENI CAM230” for Camera.

(Use the microphone provided in the room)

For Laptop User

Connect HDMI and USB cable to your laptop for projection and recording.
Select “Echo Cancelling Speakerphone” for both Microphone and Speaker.
Select “INOGENI CAM230” for Camera.

(Use the microphone provided in the room)

Lecturer / Audience Camera

Camera will Auto switch between Lecturer and Audience view.

Lecturer camera will Auto track lecturer when they move.

Turn off Auto tracking for Lecturer Camera if you want a fixed wide angle view.


Lecturer Camera View	Audience Camera View

Browser not supported